[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
set-overload-bit
Syntax
[ no ] set-overload-bit [ on-startup seconds | on-startup wait-for-bgp
[ bgpSeconds ] ]
Release Information
Command introduced before JUNOSe Release
7.1.0.
Description
Sets the overload bit, indicating to other IS-IS
routers not to use this router as an intermediate hop in their SPF
calculations. The no version restores the
default value, clearing the overload bit.
Options
- on-startup—Sets the overload bit only after a system
reload; prevents other routers from routing through this router before
it is fully operational
-
seconds—Period after the reload
during which the overload bit is set, in the range 5–86400 seconds;
the overload bit is cleared when the period expires
- wait-for-bgp—Specifies that the overload bit is
not cleared until BGP has completed convergence
-
bgpSeconds—Maximum period
to wait for BGP to converge, in the range 5–86400 seconds with
a default value of 600 seconds; the overload bit is cleared when the
period expires
Router Configuration
[Contents]
[Prev]
[Next]
[Index]
[Report an Error]
